All Clearviewkits

Clearviewkits will clear trapped moisture from your failed double glazing window unit when your seal breaks and condensation forms our popular kits come with easy to follow guides and can clear windows from 3+ days a low cost solution to replacement windows easy to install in most cases under 20 minutes.

10% off this month discount code: CLEARCODE10

Clearview kits image

Clearview Window kits

The kit that clears trapped condensation.

The process of clearing your window   Condensation forms Between a failed Double-glazing Unit When condensation between double pane windows forms it means the seal on the insulated glass unit has failed. In this situation, why replace the unit when you can fix it?   Warning this process is not suitable for toughtened safety glass it will shatter - if you have safety glass or a patio door see our safety glass kits - Patio door kits Step 1 - Apply the clear anti-slip drill stickers to the top right and bottom left of the window Step 2 - Drill two holes using the tungsten glass drill bit, Drill into the centre of the anti-slip sticker and drill both holes Step 3 - Leave both drill holes open until the condensation starts to clear Step 4 - Insert the moisture drying agent to absorb the trapped condensation in your window Step 5 - Insert the breathable plugs... and that it! There is a little more to it than that everything you need is it your kit including lots of tips and tricks to get the job done right free delivery and a free Condensation Guide come with every kit


MOISTURE Plus+ Window kits

50% extra drying agenet included.

The process of clearing your window   Condensation forms Between a failed Double-glazing Unit When condensation between double pane windows forms it means the seal on the insulated glass unit has failed. In this situation, why replace the unit when you can fix it?   Warning this process is not suitable for toughtened safety glass it will shatter - if you have safety glass or a patio door see our safety glass kits - Patio door kits Step 1 - Apply the clear anti-slip drill stickers to the top right and bottom left of the window Step 2 - Drill two holes using the tungsten glass drill bit, Drill into the centre of the anti-slip sticker and drill both holes Step 3 - Leave both drill holes open until the condensation starts to clear Step 4 - Insert the moisture drying agent to absorb the trapped condensation in your window Step 5 - Insert the breathable plugs... and that it! There is a little more to it than that everything you need is it your kit including lots of tips and tricks to get the job done right free delivery and a free Condensation Guide come with every kit

Dry plus kits image
Premium plus kits image

film Plus+ Window kits

PPE included for health & safety.

CVK film insulation kit How does it Work?   Step 1 Clean the surface   Clean, wipe the window frame surface with warm water with a small amount of detergent to remove dust, dirt and grease that may stop the tape from sticking.  Tips allow the window frame to time to dry to help the adhesive tape to stick Step 2 Measure the window   With a tape measure start to measure the distance from the start of the inside of the window you are insulating to the nearest flat surface.  Measure side to side and then top to bottom.  Example 980mm x 1120mm (0.98m x 1.12m) or (98 cm x 112 cm)    Step 3 Apply the tape   When the window frame is dry  Start to apply the double sided self-adhesive tape to the window frame You measured earlier using your measurements.  Example 980mm x 1120mm  Use your knife or scissors to trim any excess you may have.    Step 4 Apply the film   When youre ready to apply the insulation film remove the tape backing so the film will stick. Hold the piece of film up to the window and slowly start to stick the film to the tape  TIP apply one side first and pull the film to reduce creases and stick to the opposite side and the top and bottom.   Step 5 Hairdryer And to finish point the hairdryer to the film med heat, you will see the film go tight and hopefully wrinkle free!

an easy DIY fix! this kit comes with easy to follow instructions   This Window Insulation Kit is a DIY solution that lets create an extra layer of insulation on the windows. It consists of a clear plastic film and a double-sided tape that can easily apply to any window frame. The film shrinks when heated with a hairdryer, creating a tight seal that prevents cold air from entering and warm air from escaping. The film is transparent and does not reduce the amount of light or visibility through the window.   

FLY Plus+ kits

For water extraction from the base of the window.

CVK Fly Screen kit How does it Work?   Using fly screen insect mesh on windows provides several benefits   1. Insect Protection The primary benefit is keeping insects like flies, mosquitoes, and other pests out of your home while allowing fresh air to circulate freely.   2. Improved Ventilation The mesh allows you to keep windows open without worrying about pests, enabling better airflow and ventilation.   3. Enhanced Comfort By preventing insects, you can enjoy a more comfortable indoor environment, especially during warmer months when pests are more active.   4. Energy Efficiency Instead of relying solely on air conditioning, you can use natural airflow to cool your home, reducing energy consumption and electricity bills.   5. Added Privacy Some types of insect mesh offer a degree of privacy by obscuring visibility from outside while maintaining clear views from indoors.   6. Dust and Debris Reduction The mesh can help filter out dust, pollen, and debris, improving indoor air quality and cleanliness.   7. Pet Safety Fly screens can act as a barrier to prevent pets from escaping through open windows.   8. Low Maintenance Modern insect meshes are easy to clean and durable, requiring minimal up keep.   9. Customizable Options Fly screens come in a variety of materials, sizes, and designs, allowing you to choose one that suits your aesthetic preferences and specific needs. 10. Eco-Friendly Solution By reducing the need for chemical insect repellents or sprays, insect mesh is a more environmentally friendly way to deal with pests.   Overall, installing insect mesh on your windows is a practical and cost-effective solution for maintaining a pest-free, comfortable, and healthy home environment. 

Moisture plus kits image
Safety glass kits image

RESIN Glass kits

For For windows with tougthened safety glass installed.

CVK Resin Repair kit   How does it work? Step 1 – Clean   Clear and clean any dirt or moisture within the scratch, Crack or Chip on the effected glass area you are trying to repair,  this will ensure better results when you have finished the repair process.   Step 2 - Squeeze   TIP Before you start have a closer look at what direction the scratch or crack is running so when applying the resin it will give you the best coverage.   One the affected area has been filled by the resin press the clear sheets of film over the repair until all the affected area has been covered and press firmly and evenly. Step 3 – Dry   Allow for 20 – 40 minutes depending on how deep your repair is to dry.   Step 4 – Scrape   Once dry tear off the cured film sheets carefully and use your razor blade to remove any excess of the glass or effected area you are repairing


safety glass - patio door

For Patio Doors for tougthened safety glass.

Our Safety Glass kits are used when you have tougthened safety glass installed a different process and type of drill bit as you can not drill safety glass  our kit will remove trapped condensation from your double glazing window or door when the seal has failed or blown our kit will remove the moisture and clear the window. We test our kits aand try to simplify and improve the process set out in our easy to follow safety glass guide. We do supply alternative kits . We hope the guides and sections above have covered everything you need to successfully complete your project. However, if you run into any unique situations, have further questions, or just want some extra reassurance before you begin, please don't hesitate to reach out.

Patio door kits image
Resin repair kits image

Resin Repair kits

Fix`s Chips Cracks & Scratches in car windowscreens.

Windscreen resin repair kit A simple DIY set with clear UV-cure resin, applicator, and tools, made to fix small chips, star breaks, and fine cracks in car glass. Fills damage, bonds glass, hardens in sunlight/UV light, restores strength and clarity, stops cracks spreading, and leaves a nearly invisible finish a quick, low-cost, no replacement needed..

  • Just 30 minutes per defect to complete
  • The resin makes defects disappear
  • Easy DIY fix for glass and car windowscreens
  • No additional tools required
  • A low cost alternative to replacement
  • Available in Single or Twin Pack
  • Prices: £6.90 - £9.90

Fly Screen kits

Keeps out files, wasps, mosquitoes and other unwanted insects.

Fly screen (insect mesh) is a lightweight, fine-mesh barrier made from materials like fiberglass, aluminum, or polyester. Designed to fit over windows, doors, or openings, it keeps flies, mosquitoes, wasps, and other insects out while letting fresh air flow freely and maintaining visibility. Its durable, easy to install, and helps create a comfortable, bug-free indoor space..

  • Just 30 minutes per window to complete
  • keeps out files, wasps, mosquitoes and other unwanted insects
  • Easy DIY fix to keep out insects from your home
  • Cut to size 1.3m x 1.5m approx
  • Colour: Black
  • Available 1, 2 & 3 Window kits
  • Prices: £5.90 - £14.90
Fly screen kits image
Film insulation kits image

Film Insulation kits

Stops drafts and insulates windows in your home.

Film insulation is a thin, flexible, lightweight material usually made from clear plastic, or film composites designed to reduce heat transfer. It reflects radiant heat, retains warmth indoors in winter, blocks excess heat in summer, and helps stop drafts and condensation. Easy to cut and install, its commonly used on windows, behind radiators, or in roof/loft spaces to boost energy efficiency and improve indoor comfort.

  • Just 30 minutes per window to complete
  • Clears condensation creates a vapour barrier for your window
  • Easy DIY fix to stop drafts and insulates
  • Includes an easy to follow installation guide
  • Covers Windows up to 1m x 1,5m approx
  • Available in 2, 4 & 6 Window kits
  • Prices: £5.90 - £14.90

Rated 4.87 / 5

56 Reviews

Rated 8.95 / 10

72 Reviews

Rated 4.74 / 5

56 Reviews

Rated 4.61 / 5

74 Reviews

Recent Customer Feedback

We take our customer feedback seriously this helps us to develop our products so our customers can get better results.

For anyone considering this product I would say "go for it". I have a 2m x 1.5m glazed unit with Georgian bar that was condensed up and the problem I was going to have was finding a new replacement unit with bar to match the windows next to it. With nothing to lose I bought this and after 3 weeks the window is clear. Perfect. It does work. Thank you :-)

smartmart31

Website customer

shopify mini logo

So happy with our kit we did wait a few months to use it we though we had a better chance in summer as we had a better chance of the window drying 6 months on afer we used the kit window is still clear what a great kit for the price thanks.

Dave Glessing. US

Amazon US Customer

Amazon Mini logo

As Described Very Fast Delivery. Very GOOD PKG. Arrived safely sealed in a strong box. All instructions included. All accessories included. Yet too make use of items so cannot comment on its effectiveness in use. Hopefully this method will help with failing Sealed Double Glazed window panes. Thank you for your Labour saving product and Great service.
Read more

Mrs Christina.gk

eBay customer

ebay mini logo

My window seal had blown and had condensation inside the window I have seen these kits online before bought one it has worked quiet well easy to do and im not that great at DIY its been clear few a month now hopefully will stay clear not a bad bit of kit for the price
Read more

Customer in Sussex

ebay customer

ebay mini logo

Good price very quick delivery. unfortunately i didn`t read the ad fully & when i received item i read instructions fully only to find my windows were 'Toughened' so unfortunately we couldnt use on my windows. Due to that i had to return for refund. But had no problem at all with seller who was very helpful in answering my query about using on my windows & refunded. All my own fault for not reading all the description. Very good seller. Thanks
Read more

Alex. Scotland

Amazon Customer

Amazon mini logo

Many thanks Item arrived quickly good communication with Clearviewkit also very well packed. I did see the you tube video and thought it was worth a try. Not tried it yet but hopefully will work well.
Read more

L. Davis ,Wellingbourgh

Via Google

Google mini
you tube background image

See us on You tube

Watch our you tube tutorial to see what to do and how the process works using one of our kits to clear the trapped moisture in your double glazing.

You tube tutorial

Any questions? drop us an email!

If you have any questions on how to use our kits please email us and we will reply usually within a few hours depending on the time & day

Contact Us

Shop Now

Contact