How does it work?
Step 1 – Clean
Clear and clean any dirt or moisture
within the scratch, Crack or Chip on the effected glass area you
are trying to repair, this will ensure better results when you
have finished the repair process.
Step 2 - Squeeze
TIP Before
you start have a closer look at what direction the scratch or
crack is running so when applying the resin it will give you the
best coverage.
One the affected area has been filled by the resin press
the clear sheets of film over the repair until all the affected
area has been covered and press firmly and evenly.
Step 3 – Dry
Allow for 20 – 40 minutes depending
on how deep your repair is to dry.
Step 4 – Scrape
Once dry tear off the cured film
sheets carefully and use your razor blade to remove any excess
of the glass or effected area you are repairing
an easy DIY
fix!
this kit comes with easy to follow instructions
There is a little more to it than
that! that's the basics and there are lots of tips and addition
items that come with your kit.
an easy fix with some basic DIY required.