Our Blog

Read about us and our products at Clearviewkit

 

 

Blog Post:

 

Clearviewkits Your DIY Solution to Double Glazing Condensation

insulation, pest & damage control

 

A low cost solution and an alternative to replacement windows


If you have noticed moisture build-up and foggy windows in your home, youre not alone. Double glazing condensation is a common issue that arises when the seal of double-glazed windows fails. Fortunately, Clearviewkit offers a practical and cost-effective solution with their range of DIY condensation removal kits. Here’s everything you need to know about these innovative products.

What Are Clearview Kits?

Clearviewkits provide homeowners with the tools needed to address condensation issues in their double-glazed windows without the need for full window replacements. Their flagship product, the Clearviewkit, effectively removes moisture trapped between glass panes, restoring clarity and performance. the Clearview "Window Repair kit" has taken a couiple of years to develop upgrading

parts of the kit that will work better and make it easier to complete the task of clearing the condensation trapped inside your double glazing window unit. If you are intrest in this low cost solution to replacement try one of our kits.

 

The CVK Window Repair Kit - Buy a kit

At the core of Clearview's offering is the CVK Window Repair Kit, which tackles condensation in five straightforward steps:

  1. Preparation: Begin by applying anti-slip drill stickers to the designated corners of your window.
  2. Drilling: Using a tungsten glass drill bit, drill two holes at the center of the stickers.
  3. Ventilation: Keep both holes open while the condensation begins to clear.
  4. Moisture Absorption: Insert the moisture-drying agent to absorb any trapped condensation.
  5. Sealing: Finally, place the breathable plugs into the drilled holes.

Each kit comes equipped with all the necessary components, along with tips and tricks to ensure the job is done right. You’ll receive free delivery along with a complimentary Condensation Guide.

How to Reduce Condensation in Double Glazing

Understanding the root cause of condensation is essential. This phenomenon occurs when the seal on an insulated glass unit fails. Rather than going through the expense of replacing entire windows, these kits provide a simple fix that involves minimal DIY skills.

 

New products to help with your window issues is our new low cost window shrink fit insulation film pack this product is easy to install and could help with the cold weather with the drafts in old and windows that need maintainance.

 

CVK Film Insulation Kit - Buy a kit

For those looking to add an extra layer of insulation, the CVK Film Insulation Kit is an excellent solution. Here’s how it works:

  1. Clean the Surface: Ensure that the window frame is free of dust and grease using warm soapy water.
  2. Measure: Measure the dimensions of your window to cut the film to the appropriate size.
  3. Apply the Tape: Use the double-sided adhesive tape provided to attach the film to your window frame.
  4. Attach the Film: Carefully stick the insulation film onto the tape before using a hairdryer to tighten and secure it.
  5. Enjoy Efficiency: The transparent film provides insulation without sacrificing light.

This easy-to-apply kit includes a clear shrink insulation film, double-sided tape, and a user-friendly guide.

 

Another new product for 2025 Spring-Summer our low cost fly screen or insect mesh pest control on a budget.

 

CVK Fly Screen Kit - Buy a kit

To further enhance your home’s comfort, consider the CVK Fly Screen Kit, which offers several benefits:

·         Insect Protection: Keep pesky insects out while allowing fresh air to circulate.

·         Improved Ventilation: Open windows without inviting bugs indoors.

·         Enhanced Comfort & Energy Efficiency: Reduce reliance on air conditioning by utilizing natural airflow.

·         Privacy and Cleanliness: Maintain indoor air quality and enjoy added privacy.

Each kit contains robust fly screen mesh, double-sided tape, and step-by-step installation instructions.

 

The Resin repair kit was introduced the end of 2024 to help with scratches cracks & Chips to glass and your car windowscreen this low cost solution will make your issues disapear in just 20 minutes.

 

CVK Resin Repair Kit - Buy a kit

For minor imperfections such as scratches and chips, the CVK Resin Repair Kit provides an efficient solution. The process includes:

  1. Cleaning the Area: Ensure the glass is clear of dirt.
  2. Applying the Resin: Squeeze the resin into the affected area before using film sheets for even coverage.
  3. Drying: Allow the repair to set before scraping away excess resin.

Conclusion

With Clearview Kits, tackling condensation and enhancing your home’s efficiency is within reach. Their products empower homeowners to perform simple repairs and installations that improve comfort and clarity without breaking the bank. Plus, with free guides and delivery, you have everything you need to restore your windows to their pristine condition.

For any additional questions about double glazing or assistance with your kits, visit their support pages or check out their informative YouTube tutorials. Say goodbye to misty windows and hello to crystal-clear views!

 

 

Clearviewkits

are double glazing condensation moisture removal kits
they offer a DIY solutions for homeowners facing condensation issues in their double-glazed windows.
Their primary product, the Clearviewkit, is designed to remove moisture trapped between glass panes,
restoring clarity without the need for full window replacements.
 

Popular kits

Buy a kit today and get free Royal mail Tracked48 delivery & a free Condensation guide with your kit.

This month only 10% off Discount code:  Clearview

Premium 3 window repair kit

Our Premium 3 x Window kit includes PPE FFP2 Face mask & Gloves also all items required to clear condensation inside your window, A DIY fix for blown failed double glazing windows. easy to follow instructions.

Now only £15.50


more info


2 window repair kit plus

Our 2 x Window DRY Plus+ kit includes 50% extra drying agent and items required to clear condensation inside your window, A DIY fix for your blown double glazing windows.easy to follow instructions.

Now only £16.50


more info

5 window repair kit

Our 5 x Window kit includes all items required to clear condensation inside your window, A DIY fix for blown failed double glazing windows. Includes easy to follow instructions & Quick delivery.

Now only £18.50


more info

CVK Window Repair kit

 

How does it Work?

 

Condensation forms Between a failed Double-glazing Unit When condensation between double pane windows forms it means the seal on the insulated glass unit has failed. In this situation, why replace the unit when you can fix it?


tick Step 1 - Apply the clear anti-slip drill stickers to the top right and bottom left of the window

tick Step 2 - Drill two holes using the tungsten glass drill bit, Drill into the centre of the anti-slip sticker and drill both holes

tick Step 3 - Leave both drill holes open until the condensation starts to clear

tick Step 4 - Insert the moisture drying agent to absorb the trapped condensation in your window

tick Step 5 - Insert the breathable plugs... and that it!


There is a little more to it than that everything you need is it your kit including lots of tips and tricks to get the job done right

tickfree delivery and a free Condensation Guide come with every kit

 



 

Watch our YouTube tutorials

 


How to guide  -

  

How to Reduce Condensation?  -   Why do seals fail?

There is a little

more to it than that! there are lots of tips and addition items that come with your kit.
an easy fix with some basic DIY required.


get the fog out, misty windows, crystal clear window works, failed sealed units, see clearly, double glazing repairs, mist windows, double glazing repairs
early, double glazing repairs, mist windows, double glazing repairs, repairs, why do sealed units fail


 

 

 

 

 

CVK film insulation kit

How does it Work?

 

Step 1  Clean the surface

 

Clean, wipe the window frame surface with warm water with a small amount of detergent to remove dust, dirt and grease that may stop the tape from sticking. 

Tips allow the window frame to time to dry to help the adhesive tape to stick

Step 2   Measure the window

 

With a tape measure start to measure the distance from the start of the inside of the window you are insulating to the nearest flat surface. 

Measure side to side and then top to bottom. 

Example 980mm x 1120mm

(0.98m  x  1.12m) or (98 cm x 112 cm) 

 

Step 3   Apply the tape

 

When the window frame is dry 

Start to apply the double sided self-adhesive tape to the window frame

You measured earlier using your measurements. 

Example 980mm x 1120mm 

Use your knife or scissors to trim any excess you may have. 

 

Step 4   Apply the film

 

When youre ready to apply the insulation film remove the tape backing so the film will stick. Hold the piece of film up to the window and slowly start to stick the film to the tape 

TIP  apply one side first and pull the film to reduce creases and stick to the opposite side and the top and bottom.

 

Step 5   Hairdryer

And to finish point the hairdryer to the film med heat, you will see the film go tight and hopefully wrinkle free!

an easy DIY fix!

this kit comes with easy to follow instructions

 

This Window Insulation Kit is a DIY solution that lets create an extra layer of insulation on the windows. It consists of a clear plastic film and a double-sided tape that can easily apply to any window frame.

The film shrinks when heated with a hairdryer, creating a tight seal that prevents cold air from entering and warm air from escaping. The film is transparent and does not reduce the amount of light or visibility through the window. 

 

 

car windowscreen image


T
here is a little more to it than that! that's the basics and there are lots of tips and addition items that come with your kit.
an easy fix with some basic DIY required.

Whats in your window insulation kit? 1 x Easy to follow installation DIY guide. 1 x Sheet Clear shrink insulation film.(1.57m x 1.82m) each pack. (Insulates 2 Windows up to 1m x 1,5m approx) 1 x Roll double sided adhesive tape 12.7mm x 10m length. Each roll will stick up to 2 windows.! 

CVK Fly Screen kit

How does it Work?

 

Using fly screen insect mesh on windows provides several benefits

 

1. Insect Protection

The primary benefit is keeping insects like flies, mosquitoes, and other pests out of your home while allowing fresh air to circulate freely.

 

2. Improved Ventilation

The mesh allows you to keep windows open without worrying about pests, enabling better airflow and ventilation.

 

3. Enhanced Comfort

By preventing insects, you can enjoy a more comfortable indoor environment, especially during warmer months when pests are more active.

 

4. Energy Efficiency

Instead of relying solely on air conditioning, you can use natural airflow to cool your home, reducing energy consumption and electricity bills.

 

5. Added Privacy

Some types of insect mesh offer a degree of privacy by obscuring visibility from outside while maintaining clear views from indoors.

 

6. Dust and Debris Reduction

The mesh can help filter out dust, pollen, and debris, improving indoor air quality and cleanliness.

 

7. Pet Safety

Fly screens can act as a barrier to prevent pets from escaping through open windows.

 

8. Low Maintenance

Modern insect meshes are easy to clean and durable, requiring minimal upkeep.

 

9. Customizable Options

Fly screens come in a variety of materials, sizes, and designs, allowing you to choose one that suits your aesthetic preferences and specific needs.

 

10. Eco-Friendly Solution

By reducing the need for chemical insect repellents or sprays, insect mesh is a more environmentally friendly way to deal with pests.

 

Overall, installing insect mesh on your windows is a practical and cost-effective solution for maintaining a pest-free, comfortable, and healthy home environment. 

an easy DIY fix!

this kit comes with easy to follow instructions 

 

 

Fly Screen kits 1

 

 

 includes Robust black Waterproof fly screen mesh.

 

What`s in your kit? 3 x Fly Screen mesh sheet 1.3m x 1.5m (Large Window) 3 x Roll Double sided tape. 1 x Easy to follow installation guide.

 

+ Free Condensation & Mould Guide. & Free Delivery>

CVK Resin Repair kit

 

How does it work?

Step 1 – Clean

 

Clear and clean any dirt or moisture within the scratch, Crack or Chip on the effected glass area you are trying to repair,  this will ensure better results when you have finished the repair process.

 

Step 2 - Squeeze

 

TIP Before you start have a closer look at what direction the scratch or crack is running so when applying the resin it will give you the best coverage.

 

One the affected area has been filled by the resin press the clear sheets of film over the repair until all the affected area has been covered and press firmly and evenly.

Step 3 – Dry

 

Allow for 20 – 40 minutes depending on how deep your repair is to dry.

 

Step 4 – Scrape

 

Once dry tear off the cured film sheets carefully and use your razor blade to remove any excess of the glass or effected area you are repairing



 

an easy DIY fix!

this kit comes with easy to follow instructions

 

 

 

car windowscreen image



T
here is a little more to it than that! that's the basics and there are lots of tips and addition items that come with your kit.
an easy fix with some basic DIY required.

 

Window Support

Need help visit our support pages


 

How does it all work What is double glazing?

 

Double glazing refers to a window that has two panes of glass. The main component of the window is the double-glazed sealed unit, also known as an insulated glass unit (IGU) which sits in a frame of uPVC, aluminium, or timber

Learn more  

 

Condensation Why condensation forms Between a failed Double-glazing Unit

 

When condensation between double pane windows forms it means the seal on the insulated glass unit has failed. In this situation, why replace the unit when you can fix it?

Learn more  

 

Safety Glass! How to tell - Toughened Safety Glass!

 

"Toughened" or "tempered" or simply "safety" glass is, as these names suggest, much more resistant to knocks and bumps than regular glass. It is manufactured by way of a slower cooling process, and as a result,

Learn more  
mini logo
insulation resin repair fly screens kits image
CVKWindow Repair Kits   CVK Film Insulation Kits   CVK Fly Screen Kits
CVK DRY Plus+ Kits   CVK Resin Repair Kits

 

 

Tags

 

Clear condensation,  Double Glazing,  Windows,  Misty Windows,  How to,  Failed Windows Blown seals, demisting, crystal clear,

window seals, failed sealed units, see clearly, double glazing repairs, double glazing repairs, why do sealed units fail, upvc,

clearviewkit,  repair, kit, replacement, condensation, removal, moisture, hack, glass, DIY, glazing

 

 

Watch our You tube tutorials

5 steps to help clear the condensation trapped inside your double glazing windows

How to guide  -   How to Reduce Condensation?  -   Why do seals fail?

Recent Feedback

feedback left by our customers

Find us on social media

keep up to date with the latest kit upgrades and promotions!

Our Brands

Our brands are used for various social media and online stores

Clearviewkit

Clearviewkit.co.uk

Windowrepairkit

Windowrepairkit.co.uk

Clearglazekit

Clearglazekit.co.uk

Clearmywindow

Clearmywindow.co.uk