CVK film insulation kit

How does it Work?

 

Step 1  Clean the surface

 

Clean, wipe the window frame surface with warm water with a small amount of detergent to remove dust, dirt and grease that may stop the tape from sticking. 

Tips allow the window frame to time to dry to help the adhesive tape to stick

Step 2   Measure the window

 

With a tape measure start to measure the distance from the start of the inside of the window you are insulating to the nearest flat surface. 

Measure side to side and then top to bottom. 

Example 980mm x 1120mm

(0.98m  x  1.12m) or (98 cm x 112 cm) 

 

Step 3   Apply the tape

 

When the window frame is dry 

Start to apply the double sided self-adhesive tape to the window frame

You measured earlier using your measurements. 

Example 980mm x 1120mm 

Use your knife or scissors to trim any excess you may have. 

 

Step 4   Apply the film

 

When youre ready to apply the insulation film remove the tape backing so the film will stick. Hold the piece of film up to the window and slowly start to stick the film to the tape 

TIP  apply one side first and pull the film to reduce creases and stick to the opposite side and the top and bottom.

 

Step 5   Hairdryer

And to finish point the hairdryer to the film med heat, you will see the film go tight and hopefully wrinkle free!

an easy DIY fix!

this kit comes with easy to follow instructions

 

This Window Insulation Kit is a DIY solution that lets create an extra layer of insulation on the windows. It consists of a clear plastic film and a double-sided tape that can easily apply to any window frame.

The film shrinks when heated with a hairdryer, creating a tight seal that prevents cold air from entering and warm air from escaping. The film is transparent and does not reduce the amount of light or visibility through the window. 

 

 

There is a little more to it than that! that's the basics and there are lots of tips and addition items that come with your kit.
an easy fix with some basic DIY required.

Whats in your window insulation kit? 1 x Easy to follow installation DIY guide. 1 x Sheet Clear shrink insulation film.(1.57m x 1.82m) each pack. (Insulates 2 Windows up to 1m x 1,5m approx) 1 x Roll double sided adhesive tape 12.7mm x 10m length. Each roll will stick up to 2 windows.! 

CVK Fly Screen kit

How does it Work?

 

Using fly screen insect mesh on windows provides several benefits

 

1. Insect Protection

The primary benefit is keeping insects like flies, mosquitoes, and other pests out of your home while allowing fresh air to circulate freely.

 

2. Improved Ventilation

The mesh allows you to keep windows open without worrying about pests, enabling better airflow and ventilation.

 

3. Enhanced Comfort

By preventing insects, you can enjoy a more comfortable indoor environment, especially during warmer months when pests are more active.

 

4. Energy Efficiency

Instead of relying solely on air conditioning, you can use natural airflow to cool your home, reducing energy consumption and electricity bills.

 

5. Added Privacy

Some types of insect mesh offer a degree of privacy by obscuring visibility from outside while maintaining clear views from indoors.

 

6. Dust and Debris Reduction

The mesh can help filter out dust, pollen, and debris, improving indoor air quality and cleanliness.

 

7. Pet Safety

Fly screens can act as a barrier to prevent pets from escaping through open windows.

 

8. Low Maintenance

Modern insect meshes are easy to clean and durable, requiring minimal upkeep.

 

9. Customizable Options

Fly screens come in a variety of materials, sizes, and designs, allowing you to choose one that suits your aesthetic preferences and specific needs.

 

10. Eco-Friendly Solution

By reducing the need for chemical insect repellents or sprays, insect mesh is a more environmentally friendly way to deal with pests.

 

Overall, installing insect mesh on your windows is a practical and cost-effective solution for maintaining a pest-free, comfortable, and healthy home environment. 

an easy DIY fix!

this kit comes with easy to follow instructions 

 

 

 

 

 includes Robust black Waterproof fly screen mesh.

 

What`s in your kit? 3 x Fly Screen mesh sheet 1.3m x 1.5m (Large Window) 3 x Roll Double sided tape. 1 x Easy to follow installation guide.

 

+ Free Condensation & Mould Guide. & Free Delivery>

CVK Resin Repair kit

 

How does it work?

Step 1 – Clean

 

Clear and clean any dirt or moisture within the scratch, Crack or Chip on the effected glass area you are trying to repair,  this will ensure better results when you have finished the repair process.

 

Step 2 - Squeeze

 

TIP Before you start have a closer look at what direction the scratch or crack is running so when applying the resin it will give you the best coverage.

 

One the affected area has been filled by the resin press the clear sheets of film over the repair until all the affected area has been covered and press firmly and evenly.

Step 3 – Dry

 

Allow for 20 – 40 minutes depending on how deep your repair is to dry.

 

Step 4 – Scrape

 

Once dry tear off the cured film sheets carefully and use your razor blade to remove any excess of the glass or effected area you are repairing

 

an easy DIY fix!

this kit comes with easy to follow instructions

 

 

 

There is a little more to it than that! that's the basics and there are lots of tips and addition items that come with your kit.
an easy fix with some basic DIY required.